PET molding machine

Description:

PET molding machine
1.Cavity: 2
2.Output:800-1000pcs
3.200-2000ml PET bottle

PETblow moldingmachine 

 

Specification
A-8-1000semi-automaticbottle blow molding machine is suitable for producing PET plasticcontainers and bottles from 50-2000ml. It is widely used to producethe carbonated bottle, mineral water, pesticide bottle oil bottlecosmetics, wide-mouth bottle etc.

1. Adopting double crank to adjust mould , heavy locking mould,stable and fast , Adopt infrared oven to heat the perform , theperform rotated and heated equally.

2. The air system has been divided into two parts: pneumatic actionpart and bottle blow part to meet the different requirements forthe action and blow .It can provide sufficient and steady highpressure for blowing large irregular shaped bottles.

3. machine is also equipped with muffler and oiling system tolubricate the mechanical part of the machine.

4. The machine can be operated in the step-by-step mode and thesemi-auto mode.

5. The machine is small with low investment, easy and safe tooperate .

 

 

Technicalparameter

 

Name	Item	Unit	Details
Blowing machine	Dimension	mm	1600*600*1610mm
	Bottle volume (max)	ml	2000
	Bottle volume (min)	ml	50
	Bottle Neck Diameter (max)	mm	40
	Bottle Neck Diameter (min)	mm	18
	Body Diameter (max)	mm	125
	Body Height( max)	mm	420
	Number of Cavities	mold	2
	Production output	pcs/h	800-1200BPH
	Clamping force	T	5.7(56KN)
	Mold thickness	mm	200(max)
	Mold width	mm	360x390
	Space between Tie-bars	mm	120-220
	Diameter of Tie-bars	mm	63
	Scope of Tie-bars	mm	405
	Mold stroke	mm	160
	Stretching stroke (max)	mm	420
	Working pressure	Mpa	0.8-1.0Mpa
	Blowing pressure	Mpa	2.0-3.0Mpa
	Voltage/Power	V/KW	220V/1KW
Pre-heater	Dimension	mm	1870*630*1450mm
	Weight	kg	260
	Voltage/Power	V/KW	380V/14KW

 

 

PET molding machine